Sony xperia x compact official firmware download

Sony xperia x compact F5321 android 7 naugt 34.2.A.0.273
  


YOU can update or restore the firmware through pc companion but it take a long please install pc companion from here to avoid driver issue on flash tool

how to update firmware using flashtool and download file

1-download and install flashtool redirecto google drive through short link skip ad
3-install usb driver (must else can't flash) from C/flashtool/driver
4-download xperia x compact F5321 ANDROID 7 from here      and download android 6.0       F5321_34.1.A.3.49_CE.ftf from here skip 3 second add redirect using shortent link
  you can use any of file 6.0 or 7.0
5-copy the downloaded file in to c/flashtool/firmware
6-open flashtool click on flash logo and choose your model tick on wipe data and no final verification 
column
7-turn off your phone and connect phone by pressing volume down button
8 wait until the whole process is complete .after long press power button to restart to normal mode

Sony xperia Z5 dual E6633 official firmware


Sony xperia Z5 dual E6633 official firmware 

this firmware is only for xperia Z5 DUAL E6633 
Please check the model name and number care fully before download
you can easily flash sony xperia devise there have no chance to dead during firmware update 
if you are a customer (not a professional servicer) you can use sony pc companion to update or restore   firmware pleas download pc companion from here and install it to avoid usb driver issue


how to install firmware


1-download and install flashtool FROM HERE skip ad redirect to google drive
3-install usb driver (must else can't flash) from C/flashtool/driver
4-download xperia z5 dual firmware android 7  E6633_32.3.A.0.372_SA.ftf from here skip 3sec ads to go  android 6 from here
download page
5-copy the downloaded file in to c/flashtool/firmware
6-open flashtool click on flash logo and choose your model tick on wipe data and no final verification 
column
7-turn off your phone and connect phone by pressing volume down button
8 wait until the whole process is complete .after long press power button to restart to normal mode


SONY XPERIA XA F3111 OFFICIAL FIRMWARE

 XA F3111 FIRMWARE ANDROID 6.0 33.2A.470  download
Xperia xa is new sony android smart phone have the capacity of 2gb ram and work on media-teck mtk platform and 13 mega pixel camera with android 6.0 platform
as a service guider i don,t describe more about its future
You can update or restore (boot loop /stuck logo) your firmware of this modal in two manner
1-manually using sony pc companion (better for customer ) download from here   follow the guidness
show in app but it take a long to complete the whole process
2-using flash tool (better for professional services)

                                          How to flash using flash tool

1-download and install flashtool
3-install usb driver (must else can't flash) from C/flashtool/driver
4-download XA F3111 FIRMWARE ANDROID 6.0 33.2A.470 from here skip 3 second add redirect using shortent link
5-copy the downloaded file in to c/flashtool/firmware
6-open flashtool click on flash logo and choose your model tick on wipe data and no final verification 
column
7-turn off your phone and connect phone by pressing volume down button
8 wait until the whole process is complete .after long press power button to restart to normal mode

Spreadtrum read firmware done without box

Spreadtrum SPD read firmware done 

                            click here for video instruction 

Comparing to other CPU chip-set like Medea teak and Qualcomm it is very risk to recover from boot loop and stuck on logo in spreadtrum android devise.Updating firmware on known spreadrum devise like Samsung Lenovo ect can don with following instructions and firmware file provided by their company .
The main use of read firmware is to recover unknown companies device .Through this facility you can create your own firmware for unknown devices from other phon

Reading instructions

1-Read with piranha box download link without hardware
2-Read with miracle box DOWNLOAD WITHOUT HARD WARE
3-Read with volcano box

                          



This is a reading logo from miracle box


Definition Applied
  1. Power Off Phone , Remove Battery, Insert Battery Back
  2. Please Hold BootKey(UP and DOWN),Insert USB cable
  3. Use Miracle Boot Key In cases Boot key not Find
  4. Battery Should be Charged more then 50%
  Scanning USB Serial port...
  SU2Serial Port: COM52
  Connecting to Phone,Wait..
  Done.
  Infor: SPRD3
  Initialize boot22...
  reading,Wait...
  prodnv...
  splloader...
  wmodem...
  wdsp...
  wcnmodem...
  logo...
  fbootlogo...
  boot...
  system...
  cache...
  recovery...
  userdata...
  Read Completed.
  File save to: H:\ikkon\ikon firmware spd

z3x Samsung tool pro 27.7 full setup

This tool is not free. To use this tool please buy this product from www.z3x.com
In this article we include this tool for learning and   testing purpose only  to use this tool with full access please buy the product with hardware

new version added so many new models with frp full accessing in download mode .And also support reactivation on download mode

                         WATCH VIDEO FOR BETTER UNDER STAND


first                


download rar file
copy the file in to c/program file/z3x/samsung/samsung tool pro 
copy file to correct location to avoid error
good luck  
                           DOWNLOAD z3x Samsung tool pro 27.7 (only for testing )

N9006 clone mtk dead after flash fixed

N9006 dead recovered

N9006 china clone is mtk based smart phone there have a chance to dead that phone during firmware update through sp flash tool
The main reason for dead problem is deuto the changing of preloader file.So that you can exclude the prealoade file from firmware file .For boot loop issu there have 
This phone may look  like Samsung not series it is very hard to soft repair for this phone
here i discuss 100% tested firmware for n9006 samsung clone ,This firmware is only for dead phone 

                                              download bin file from here 

click here to watch video for flashing guide

how to put MI 3S MI NOT 3 fastboot to qualcomm edl mode



New redmi mi devise can't flash in fastboot mode so you want to put your devise in to qualcomm edl mode .You can't put your devise in to qualcomm edl mode by key combination .So i guiding simple steps to reboot your device to   qualcomm edl mode
1-
     Using fastboot comand
     download fastboot usb driver or install mi pc suit include driver

    download fastboot to edl tool from here

run edl bat file phone will automatically reboot to edl mode


2-
    Using edl cable

buy the cable .and turn off devise and press and hold switch of cable and connect to phone
phone automatically jamb to edl mode